Siemens IP-Module Dokumentacja

Siemens TCP/IP EthernetDriver Help© 2015 Kepware Technologies

Siemens TCP/IP Ethernet Driver Help3. The bit range for Byte 1, Byte 2, Byte 3, and Byte 4 is 7-0.Little EndianDWord 13-13-02-92-82-72-62-52-42-32-22-

Siemens TCP/IP Ethernet Driver HelpDescriptions of the parameters are as follows:l STEP 7 Project File(*.S7P): Select the ellipsis button to browse f

Siemens TCP/IP Ethernet Driver HelpCable Diagramswww. kepware.com12

Siemens TCP/IP Ethernet Driver HelpHow To Configure S7-200 Connections in Micro/WINConfigured connections are accomplished through the Ethernet wizard

Siemens TCP/IP Ethernet Driver HelpNote:The program must be compiled before the Ethernet wizard can execute. Correct any errors in the program beforec

Siemens TCP/IP Ethernet Driver HelpStep 3: Assigning Module Address1. Enter the IP Address, Subnet Mask and Gateway Address if applicable. Alternative

Siemens TCP/IP Ethernet Driver HelpNote:The number of connections selected determines how many simultaneous connections the PLC can support. Wheninten

Siemens TCP/IP Ethernet Driver HelpThere are two types of connections, client and server. In a client connection, the device is a client and makesrequ

Siemens TCP/IP Ethernet Driver HelpStep 5b: Connection 11. Select This is a Server Connection.www. kepware.com18

Siemens TCP/IP Ethernet Driver Help2. Notice the Local TSAP automatically incremented to 11.00.3. Enter a Remote TSAP or accept the default. This will

Siemens TCP/IP Ethernet Driver HelpTable of ContentsTable of Contents 2Siemens TCP/IP Ethernet Driver Help5Overview5Device Setup 6Communications Param

Siemens TCP/IP Ethernet Driver HelpStep 5c: Connection 21. Select This is a Server Connection.www. kepware.com20

Siemens TCP/IP Ethernet Driver Help2. Notice the Local TSAP automatically incremented to 12.00.3. Enter a Remote TSAP or accept the default. This will

Siemens TCP/IP Ethernet Driver HelpStep 5d: Connection 31. Select This is a Server Connection...www. kepware.com22

Siemens TCP/IP Ethernet Driver Help2. Notice the Local TSAP automatically incremented to 13.00.3. Enter a Remote TSAP or accept the default. This will

Siemens TCP/IP Ethernet Driver HelpThat completes the configuration of the four connections that were selected.Note:Notice that the Local TSAP in the

Siemens TCP/IP Ethernet Driver HelpStep 7: Memory for Configuration1. Click Suggest Address to let the wizard find the best available location to stor

Siemens TCP/IP Ethernet Driver HelpNote:It is recommended that the Micro/WIN software pick this location for the application. If a CRC was not generat

Siemens TCP/IP Ethernet Driver Help4. The image below shows ETH0_CFG.5. Now that the results of the Ethernet wizard have been confirmed, a connection

Siemens TCP/IP Ethernet Driver Help2. If this is a new Simatic project, add the necessary modules to the Rack in HW Config. For the Siemens TCP/IPEthe

Siemens TCP/IP Ethernet Driver Help3. From the General tab, click the Interface | Properties button.www. kepware.com29

Siemens TCP/IP Ethernet Driver HelpData type <type> is not valid for device address <address>.65Device address <address> contains a

Siemens TCP/IP Ethernet Driver Help4. Specify the IP and Subnet Mask for this module.5. To network this module, click New under Subnet. Next, select t

Siemens TCP/IP Ethernet Driver Help3. Configure the desired number of PG/OP and PC (S7 Communication) connections.Type DescriptionPG Communication Use

Siemens TCP/IP Ethernet Driver HelpNote:For new Simatic projects, refer to the PLC's documentation for information on the default IP address sett

Siemens TCP/IP Ethernet Driver Help3. Select the appropriate PG/PC interface. This will prompt the TIA to scan the network for the device.4. Once the

Siemens TCP/IP Ethernet Driver Help9. Return to the Portal View and then select the Device & Networks tab. Then, click Add new device.10. Next, se

Siemens TCP/IP Ethernet Driver HelpNote: The device is now configured and can be placed in Run Mode for communications.How To Configure S7-1500 Connec

Siemens TCP/IP Ethernet Driver Help5. In the server, create a new channel. In Device Driver, select Siemens TCP/IP Ethernet Driver fromthe drop-down l

Siemens TCP/IP Ethernet Driver HelpOptimizing Siemens TCP/IP Ethernet CommunicationsThe Siemens TCP/IP Ethernet Driver was designed to provide the bes

Siemens TCP/IP Ethernet Driver HelpData Types DescriptionData Type DescriptionBoolean Single bitByte Unsigned 8-bit valueChar Signed 8-bit valueWord U

Siemens TCP/IP Ethernet Driver HelpAddress DescriptionsAddress specifications vary depending on the model in use. Select a link from the following lis

Siemens TCP/IP Ethernet Driver HelpUnable to read <block size> bytes starting at address <address> on device <device name>. Devicere

Siemens TCP/IP Ethernet Driver HelpMB0-MB65535MW0-MW65534MD0-MD65532Byte, Char, String**Word, Short, BCDDWord, Long, LBCD,FloatRead/WriteRead/WriteRea

Siemens TCP/IP Ethernet Driver HelpFor Float, DWord, Long, and Long BCD arrays, the base address + (rows * cols * 4) cannot exceed 65536. Keepin mind

Siemens TCP/IP Ethernet Driver HelpNote:All brand and product names are trademarks, registered trademarks, or service marks of their respectiveholders

Siemens TCP/IP Ethernet Driver HelpInternal TagsAlthough the following internal tags are not visible in the server configuration, they can be browsed

Siemens TCP/IP Ethernet Driver HelpSee Also: ExamplesS7 Data TypesThe S7 data type is used to coerce the data type for a tag. It does not apply to Tim

Siemens TCP/IP Ethernet Driver HelpDI65532.bDINT0.b-DINT65532.b.b is Bit Number0-31BooleanDT S7 Date_And_TimeComplex data type stored with 8 bytes as

Siemens TCP/IP Ethernet Driver Help0-15*These are raw strings that differ in structure and usage from the STEP 7 string data type.Note:Use caution whe

Siemens TCP/IP Ethernet Driver HelpWhen writing to T memory, the Siemens time base will also be applied. To assign a value to a timer in thecontroller

Siemens TCP/IP Ethernet Driver HelpTIME ITIME4 MTIME4 DB1,TIME4WWordWordBooleanArrayIW0IWORD0IW0.15IWORD0.15IW0[10]IWORD0[10]MW0MWORD0MW0.15MWORD0.15M

Siemens TCP/IP Ethernet Driver HelpDBX65534.b.b is Bit Number 0-15BDBB**Unsigned Byte B0-B65535DBB0-DBB65535Byte, CharWDBW**Unsigned Word W0-W65534DBW

Siemens TCP/IP Ethernet Driver HelpSiemens TCP/IP Ethernet Driver HelpHelp version 1.065CONTENTSOverviewWhat is the Siemens TCP/IP Ethernet Driver?Dev

Siemens TCP/IP Ethernet Driver HelpArray ID0_4_3----MD0_4_3--------DB1.DBD0F_4_3Note:All brand and product names are trademarks, registered trademarks

Siemens TCP/IP Ethernet Driver HelpByte BYTE0-BYTE65535WWordUnsigned Word W0-W65534WORD0-WORD65534Word, Short,BCDBCDKFBCDShortIINTSigned Word I0-I6553

Siemens TCP/IP Ethernet Driver HelpArrayIINT0BCDII0.10IINT0.10MINT0BCDMI0.10MINT0.10DB1.INT0BCDDB1.I0.10DB1.INT0.10DDWORDDWordLBCD (BCD)Float (IEEE)Lo

Siemens TCP/IP Ethernet Driver HelpSee Also: ExamplesMemory TypesMemory Type Description Address Range Data Type AccessIEInputsDependent on S7 Data Ty

Siemens TCP/IP Ethernet Driver HelpArray ICHAR0,10 MCHAR0,10 DB1,CHAR0,10WWordWordArrayIW0IWORD0IW0,10IWORD0,10MW0MWORD0MW0,10MWORD0,10DB1,W0DB1,WORD0

Siemens TCP/IP Ethernet Driver HelpCZCounters C0-C65535Z0-Z65535Word, Short Read/WriteSee Also: ExamplesAccessing Structured Elements in STEP 7For the

Siemens TCP/IP Ethernet Driver HelpExamplesS7 Data Type Data Type Input Flags Data BlocksNoneDBXBoolean I0.7----M0.7--------DB1.DBX0.7BDBBByte IB0----

Siemens TCP/IP Ethernet Driver HelpNone*DBX**Bit 0.b-65534.bDBX0.b-DBX65534.b.b is Bit Number 0-15BooleanBDBB**Unsigned Byte B0-B65535DBB0-DBB65535Byt

Siemens TCP/IP Ethernet Driver HelpAll brand and product names are trademarks, registered trademarks, or service marks of their respectiveholders.Lega

Siemens TCP/IP Ethernet Driver HelpFloatNote: PI and PE access the same memory area.Peripheral Outputs PQ0.b-PQ65535.b.b is Bit Number 0-7PQB0-PQB6553

Siemens TCP/IP Ethernet Driver HelpDevice SetupSupported DevicesS7-200 via CP243S7-300 via CP343S7-400 via CP443S7-1200*S7-1500*S7-300 via NetLinkS7-4

Siemens TCP/IP Ethernet Driver HelpData Block Right Byte DB1-N:KR0-KR655341-N is Block NumberAlternatesDB1DR0-DBNDR655341-N is Block NumberByte, Char,

Siemens TCP/IP Ethernet Driver Help2. Use caution when modifying Word, Short, DWord, and Long types. For I, Q, and F each address starts at abyte offs

Siemens TCP/IP Ethernet Driver HelpKL vs. KR vs. DBBKL and KR determine whether the left byte or right byte of the data block word is returned.Value 8

Siemens TCP/IP Ethernet Driver HelpError DescriptionsThe following classes of error/warning messages may be generated. Click on the link for a list me

Siemens TCP/IP Ethernet Driver HelpData Access ErrorsError Code Description0xFF No error0x01 Hardware fault0x03 Illegal object access0x05 Invalid addr

Siemens TCP/IP Ethernet Driver HelpData type <type> is not valid for device address <address>.Error Type:WarningPossible Cause:A tag addre

Siemens TCP/IP Ethernet Driver HelpUnable to generate a tag database for device <device name>. Reason: Failed to read data from theSTEP 7 projec

Siemens TCP/IP Ethernet Driver HelpSolution:Verify that the Simatic STEP 7 project is not corrupt and can be successfully opened in Simatic STEP 7. If

Siemens TCP/IP Ethernet Driver HelpNote:Automatic Tag Database Generation is only supported for the S7-300 and S7-400 device models.Unable to generate

Siemens TCP/IP Ethernet Driver HelpUnable to generate a tag database for device <device name>. Reason: Thespecified CPU is not supported.Error T

Siemens TCP/IP Ethernet Driver HelpCommunications ParametersDescriptions of the parameters are as follows:l Port Number: This parameter specifies the

Siemens TCP/IP Ethernet Driver HelpThe client must access the data using the array element tags that were generated.Notes:1. Variables with the STEP 7

Siemens TCP/IP Ethernet Driver HelpWinsock initialization failed (OS error=n).Error Type:FatalOSErrorIndication Possible Solution10091 Indicates that

Siemens TCP/IP Ethernet Driver HelpDevice <device name> is not responding.Error Type:WarningResult:If tag was being read:l If tag is a block tag

Siemens TCP/IP Ethernet Driver HelpNote:No protocol or data access errors can occur for this operation.See Also:Error CodesUnable to connect to device

Siemens TCP/IP Ethernet Driver Helpl If tag is an array tag or string tag, just this tag will be deactivated.This is signified by the postfix message

Siemens TCP/IP Ethernet Driver Help1. If tag is to be read in the process of establishing an association, and a device error (such as transport orprot

Siemens TCP/IP Ethernet Driver HelpContact Technical Support.See Also:Error CodesUnable to read <block size> bytes starting at address <addre

Siemens TCP/IP Ethernet Driver HelpUnable to read <block size> bytes starting at address <address> on device<device name>. Frame con

Siemens TCP/IP Ethernet Driver Help2. If no device errors occurred:l If tag is a block tag, the entire block will be invalidated. All tags within that

Siemens TCP/IP Ethernet Driver HelpUnable to write to <address> on device <device name>. Device returnedprotocol error [Class=<class>

Siemens TCP/IP Ethernet Driver HelpLink Type TSAP Value (hex)PG 4B57 ('KW')Configured A remote (client) TSAP configured in Micro/WIN's

Siemens TCP/IP Ethernet Driver HelpWarningResult:The write operation to the address failed.Possible Cause:An error was returned from the PLC or NetLin

Siemens TCP/IP Ethernet Driver HelpIndexAAddress <address> is out of range for the specified device or register. 64Address Descriptions 39Addres

Siemens TCP/IP Ethernet Driver HelpEError Codes 63Error Descriptions 63FFloat 38HHelp Contents 5How To Configure S7-1200 Connections with the Totally

Siemens TCP/IP Ethernet Driver HelpNNetLink 7NetLink: S7-300 Address Descriptions 42NetLink: S7-400 Address Descriptions 42Network 6OOptimizing Siemen

Siemens TCP/IP Ethernet Driver HelpUnable to establish association with device <device name>. Device returned transporterror [Code=<code>]

Siemens TCP/IP Ethernet Driver Helpcontains a syntax error. Expected ddD_hhH_mmM_ssS_hhhMS format. 80WWindows code page warning for device <channel

Siemens TCP/IP Ethernet Driver HelpThis parameter specifies the number of the rack in which the CPU of interest resides. For information on how toread