Siemens TC35 Terminal Dokumentacja Pobierz pdf (Strona 158)

100

101

TC35i AT Command Set

7.11 ATS0

obil

TC35i_ATC_V02.07 Page 158 of 439 1/30/04

Confidential / Released

7.11 ATS0 Set number of rings before automatically answering the

call

Syntax

Command Description

This parameter setting determines the number of rings before automatic answering.

Parameter Description

000

(&F)

automatic answering is disabled

001-255 enable automatic answering on the specified ring number

Notes

• This command works for MT data, fax and voice calls.

• Autoanswering of CSD data and fax calls is supported on ASC0/Mux1 only.

• If

<n> is set to higher values, the calling party may terminate the call establishment before the call can be

automatically answered.

• The correlation between

ATS7 and ATS0 is important.

Example: ATS7=30 and ATS0=20 may not allow call establishment.

• Setting is local to the interface. It is allowed to have different settings on different interfaces. In such cases

the interface 'wins', which is idle and uses the smallest

<n> value.

Read Command

ATS0?

Response(s)

<n>

Write Command

ATS0=<n>

Response(s)

PIN ASC0 MUX1 MUX2 MUX3

! % % % %

Reference(s)

V.25ter

<n>

(num)(&W)(&V)

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 438 439

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens TC35 Terminal Dokumentacja Strona 158

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Siemens TC35 Terminal