Siemens Codelock K44 Duo Instrukcja Użytkownika Strona 12

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 116
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 11
12 K12 Installation & User Manual
ENG
Programming
Before you start programming K12, make a note
of the codes to be used, to what timing group
they should belong and which relay output they
should control. At the back of this manual you
will find a chart designed for this purpose. Look
at the chart as you program K12 according to
the instructions below.
Buzzer and LEDs
During programming you will be guided by the
buzzer and the LEDs.
In programming mode before a function is
chosen: Green and yellow LED flashes.
During programming: Yellow LED goes out.
Green LED is lit.
Correct instruction: Confirmed by a rising signal
consisting of two quick beeps.
Faulty instruction: Confirmed by a falling signal
consisting of two quick beeps.
NOTE!
During programming mode, if a button is
not pressed within 20 seconds, the code
lock goes back to normal operation.
Przeglądanie stron 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 115 116

Komentarze do niniejszej Instrukcji

Brak uwag