Siemens KDN Series Instrukcje Operacyjne Pobierz pdf (Strona 65)

KINCO

Device Bit Address Word Address Format Notes

Output bit 0X1-65535 ------ DDDDD

Input bit (read only) 1X1-65535 ------ DDDDD

Input Register (read only) ------ 3X1-65535 DDDDD

Output Register ------ 4X1-65535 DDDDD

Controller Setting

1. Set the communication parameter

Setting communication parameter in “setting mode”

(1)

(Station number) matching the station No. of the Ev5000

(2)

(Baudrate)

(3)

(Data bit)

(4)

(Parity)

(5)

(Stop bit)

Non-supported formats: 7, N, 1 or 8, O, 2 or 8, E, 2(Databit、Parity、Stopbit).

(6) Setting the parameter of CoSH

The data must be ON when executing write operation in touch-screen.

2. Communication parameters and notes

DTA4848：Address and Content of Word Register (corresponds to 4X in the HMI)

Address Content Explanations

4700H Process value (PV)

4701H Set point (SV)

4702H Upper-limit alarm 1

In the running mode

, when ALA1 is 1 and

Upper-limit alarm is valid.

4703H Lower-limit alarm 1

In the running mode

, when ALA1 is 1 and Lower

-limit alarm is valid.

4704H Upper-limit alarm 2

In the running mode

, when ALA2 is 2 and

Upper-limit alarm is valid.

4705H Lower-limit alarm 2

In the running mode

, when ALA2 is 2 and Lower

-limit alarm is valid.

4706H Upper-limit of temperature range The data content should not be higher than the temperature

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 257 258

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens KDN Series Instrukcje Operacyjne Strona 65

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Siemens KDN Series