Siemens S7-400PLC Dokumentacja Strona 35

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 80
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 34
Get a start (quick start - introduction)
01.00|FB20|en
35
Fig. 49
5 Hardware configuration is transferred to the PLC.
If the question whether the PLC/CPU should be set to stop is
displayed, the PLC had previously not been set to stop or the
wrong control was selected. The transfer may have to be ab-
orted.
In this example it is assumed that there is no PLC program yet in
the PLC.
If the PLC is now switched to "Run" and everything is correct (in-
cluding the connected hardware), the system should go into and
remain in "Run" without any disturbance.
Przeglądanie stron 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 79 80

Komentarze do niniejszej Instrukcji

Brak uwag