Siemens HICOM 300 Instrukcja Użytkownika Pobierz pdf (Strona 18)

Installing the Gigaset USB Adapter 300

Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / installation.fm / 14.11.2008

Schablone 2004_12_27

If no connection is currently active, a red cross appears above the icon and Discon-

nected appears in the QuickInfo.

Reading the connection quality on the icon

The icon changes gradually depending on the current connection quality. The better the

connection quality, the higher the transmission speed.

With reasonable to poor connection:

ì If possible, move your PC closer to the connection partner for greater field strength.

Status indicators

The Gigaset USB Adapter 300 has two status indicators (LEDs). They are used to indicate

the

u Operating status (Power), green

u Transmission status (Link/Act), green

No WLAN available (red cross over bar)

There is no LAN available to which you could establish a connection within

the reach of your Gigaset USB Adapter 300.

ì Check the configuration of the access point and adjust the settings for

the Gigaset USB Adapter 300 accordingly.

ì Change your location to reduce the distance to a connection partner.

LED State Meaning

Power

The Gigaset USB Adapter 300 was installed successfully

on your PC and is ready for operation.

Off The device is not ready.

WLAN

On There is no connection to the wireless network.

Blinking Data is being transmitted.

Off There is currently no data traffic.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Brak uwag

Siemens HICOM 300 Instrukcja Użytkownika Strona 18