Siemens EF 711 Series Podręcznik Użytkownika Pobierz pdf (Strona 103)

Configuring the Wireless AP

Discovery and Registration Overview

SCALANCE WLC711

User Guide, V8.11, 07/2012, C79000-G8976-C260-03 3-15

To Configure the AP LED Operational Mode When Configuring an Individual

Wireless AP:

1. From the top menu, click Wireless APs. The Wireless AP screen displays.

2. In the left-hand pane, click All APs. The AP Configuration page displays with the AP

Properties tab exposed.

3. In the second column from the left, select the appropriate AP.

4. On the AP Properties tab, click the Advanced button. The Advanced window displays.

5. In the LED field, click the arrow and select an LED operational mode. See Table 3-6 on

page 3-14 for a description of each option.

To Set the AP LED Operational Mode When Using the AP Mulit-edit Feature:

1. From the top menu, click Wireless APs. The Wireless AP window displays.

2. In the left-hand pane, click AP Multi-edit. The AP Multi-edit window displays.

3. In the Wireless AP section, select one or more Wireless APs. The AP Configuration screen

displays.

4. In the AP Configuration section, locate the LED field. Click the arrow and select an LED

operational mode. See Table 3-6 on page 3-14 for a description of each option.

To Set the AP LED Operational Mode When Configuring Default AP Behavior:

1. From the top menu, click Wireless APs. The Wireless AP screen is displayed.

2. In the left pane, click AP Default Settings. The AP Default Settings page displays with the

Common Configuration tab exposed.

3. Click the AP tab that corresponds to the type of AP that you want to configure. The AP

Properties and Radio settings become available.

4. Click the Advanced button. The Advanced window displays.

5. In the LED field, click the arrow and select an LED operational mode. See Table 3-6 on

page 3-14 for a description of each option.

Configuring the Wireless APs for the First Time

Before the Wireless AP is configured for the first time, you must first confirm that the following

has already occurred:

• The SCALANCE IWLAN Controller has been set up. For more information, see Chapter 2,

Configuring the SCALANCE IWLAN Controller.

• The SCALANCE IWLAN Controller has been configured. For more information, see

Chapter 2, Configuring the SCALANCE IWLAN Controller.

• The Wireless APs have been installed.

For installation information, refer to the respective access point manual.

Once the installations are completed, you can then continue with the Wireless AP initial

configuration. The Wireless AP initial configuration involves two steps:

1. Define parameters for the discovery process. For more information, see “Defining Properties

for the Discovery Process” on page 3-16.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 491 492

Brak uwag

Siemens EF 711 Series Podręcznik Użytkownika Strona 103