Siemens EF 711 Series Podręcznik Użytkownika Pobierz pdf (Strona 146)

Configuring the Wireless AP

Configuring VLAN Tags for Wireless APs

SCALANCE WLC711

3-58 C79000-G8976-C260-03, 07/2012, User Guide, V8.11

Channel Plan If ACS is enabled you can define a channel plan for the Wireless

AP. Defining a channel plan allows you to limit which channels are

available for use during an ACS scan. For example, you may want

to avoid using specific channels because of low power, regulatory

domain, or radar interference.

For 5 GHz Radio nodes, click one of the following:

All channels — ACS scans all channels for an operating channel

and returns both DFS and non-DFS channels, if available.

All Non-DFS Channels — ACS scans all non-DFS channels for

an operating channel.

Custom — To configure individual channels from which the ACS

will select an operating channel, click Configure. The Custom

Channel Plan dialog displays. By default, all channels participate

in the channel plan. Click the individual channels you want to

include in the channel plan. To select contiguous channels, use

the Shift key. To select multiple, non-contiguous channels in the

list, use the CTRL key. Click OK to save the configuration.

For 2.4 GHz Radio nodes, click one of the following:

3 Channel Plan — ACS will scan the following channels: 1, 6, and

11 in North America, and 1, 7, and 13 in the rest of the world.

4 Channel Plan — ACS will scan the following channels: 1, 4, 7,

and 11 in North America, and 1, 5, 9, and 13 in the rest of the

world.

Auto — ACS will scan the default channel plan channels: 1, 6,

and 11 in North America, and 1, 5, 9, and 13 in the rest of the

world.

Custom — If you want to configure individual channels from

which the ACS will select an operating channel, click Configure.

The Add Channels dialog is displayed. Click the individual

channels you want to add to the channel plan while pressing the

CTRL key, and then click OK.

Antenna Selection Antenna Selection — Click the antenna, or antenna combination,

you want to configure on this radio.

When you configure the Wireless 802.11n AP to use specific

antennas, the transmission power is recalculated; the Current Tx

Power Level value for the radio is automatically adjusted to reflect

the recent antenna configuration. It takes approximately 30

seconds for the change to the Current Tx Power Level value to

be reflected in the SCALANCE W Wireless Assistant. Also, the

radio is reset causing client connections on this radio to be lost.

Note: Antenna Selection is not applicable to the Outdoor AP

models.

Table 3-11 AP Default Settings (continued)

Field Description

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 491 492

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens EF 711 Series Podręcznik Użytkownika Strona 146

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Siemens EF 711 Series