Siemens P1 Instrukcja Użytkownika Pobierz pdf (Strona 13)

Siemens APOGEE™ FLN (P1) Communication Kit

MN04008002E

For more information visit:

www.EatonElectrical.com

3-3

February 2006

3. Secure the communication cables to the drive frame with the grounding clamp as

shown in

Figure 3-5

Figure 3-5: Grounding the Communication Cables

Bus Terminal Resistors

If the OPTCB connector is the last device on the network, the bus termination must be set to

ON with Jumper X4. See

Figure 3-6

Figure 3-6: Using Jumper X4 to Set the Bus Termination

ON = Terminated: This is the last device on network.

Bus

Connector

Jumpers Interface Board

Connector

device is connected past this device.

OFF = Not Terminated: At least one other network

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Brak uwag

Siemens P1 Instrukcja Użytkownika Strona 13