Siemens P1 Instrukcja Użytkownika Pobierz pdf (Strona 7)

Siemens APOGEE™ FLN (P1) Communication Kit

MN04008002E

For more information visit:

www.EatonElectrical.com

1-1

February 2006

Chapter 1 — Overview

Introduction

The Cutler-Hammer

HVX9000 from Eaton’s electrical business can be controlled, monitored

and programmed from a host system via the Siemens APOGEE™ FLN (P1) communication

protocols with the addition of the OPTCB RS-485 Communication Option Board kit.

If you purchase your Communication Board Kit separate from the drive, please note that it

must be installed in slot E on the control board of the HVX9000.

Speciﬁcations

Table 1-1: Speciﬁcations

Item Speciﬁcation

Communication Board Connections

Interface OPTCB: Pluggable connector (5.08 mm)

Data Transfer Method RS-485, half-duplex

Transfer Cable Twisted pair (1 pair and shield)

Electrical Isolation 500V DC

Communications

Siemens P1 As described in Siemens P1 Protocol Speciﬁcation

Baud Rate 4800 baud

Addresses 0 to 99

Environment

Ambient Operating Temperature 14 to 131°F (-10 to 55°C)

Storage Temperature -40 to 140°F (-40 to 60°C)

Humidity <95%, non-condensing

Altitude Max. 3280 ft. (1000m)

Vibration 0.5G at 9 to 200 Hz

Safety

Standards Fulﬁls EN 50178 standard

Certiﬁcation CE, UL

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Brak uwag

Siemens P1 Instrukcja Użytkownika Strona 7