Siemens SINUMERIK 802D sl Instrukcja Obsługi Pobierz pdf (Strona 58)

Manual machining

5.4 Manual machining using cycles (functions)

Manual Machine Plus Turning

58 Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

5.4.2 General parameters

General parameters

When parameterizing the particular functions, among others, the following general

parameters are available:

Parameter Description

Function name Number of the selected function

Tool T Tool number

Compensation D Tool offset number

Direction of spindle rotation Toggle field for spindle direction of rotation (clockwise/counterclockwise)

Feed value F Feed value

Type of feedrate Toggle field for feed type (mm/min or mm/rev)

Spindle speed S Spindle speed value

Spindle type Toggle field for spindle type (rev/min or m/min)

Spindle speed

limitation

MR Speed limitation for constant cutting rate

Coolant Toogle field for coolant function

(coolant OFF/coolant ON)

Machining The type of machining operation can be selected in this toggle field. The following options

are available: “Complete machining” -> “Roughing only” -> “Finishing only”

Position The machining direction can be selected with the first toggle field.

The following options are available: "Outside right" -> "Inside right" -> "Outside left". The

diagram displayed on the screen changes to indicate which option is selected.

The cutting direction can be selected with the second toggle field.

Available selection: infeed in the longitudinal axis and roughing cut in the transverse axis

(face), or roughing cut in the longitudinal axis and infeed in the transverse axis (long.). The

current selection is shown in the form of a diagram on the screen.

Reference z0 Contour start position in the longitudinal axis (absolute position of the Z axis).

Note

Additional parameter descriptions for the individual functions are provided in the

corresponding chapters.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 129 130

Brak uwag

Siemens SINUMERIK 802D sl Instrukcja Obsługi Strona 58