Siemens EF 83P Series Instrukcja Obsługi Pobierz pdf (Strona 16)

1-6

Before turning On The Power After Installation:

After completing machine installation, check the following

points before turning ON the power

(1) Make sure that all bolts are tightened securely

(2) Make sure that all connectors are connected securely

(3) Make sure that all hydraulic hoses and air pipes are

connected securely.

(4) If the machine is equipped with any optional external

equipment (bar feeder, loader, robot), make sure that each

electrical cable and hydraulic/pneumatic pipes are

connected correctly.

(5) Check the input voltage and all the L1/L2/L3 (R/S/T)

phases of input power.

After Turning ON The Power After Installation:

(a) Never feed the axes right away after turning ON the

power; manually operate the cycle pump to supply

lubricating oil to the slideway surfaces first.

(b) Check for oil leaks. Make sure that all of the gauges

indicate the correct values.

removed.

(d) Repeatedly open and close the chuck to break in the

chuck operation cylinder. Then, break in the spindle.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 112 113

Brak uwag

Siemens EF 83P Series Instrukcja Obsługi Strona 16