Siemens SISTORE AX9 Przewodnik Instalacji Pobierz pdf (Strona 34)

Functional test

Siemens Building Technologies

Fire Safety & Security Products 03.2009

7 Functional test

The Functional Test ensures the proper operation of the device. In case the

Functional Test is not successful even after inserting a new HDD, the devices shall

be sent to the Service Centre.

7.1 Preconditions

The following point need to be checked before starting the Functional Test:

z Connect the power supply (make sure that the power supply is stable)

z Recording for the Functional Test for minimum 2 hours

z If the firmware of the device needs to be upgraded, the Functional test shall be

performed after the firmware upgrade.

For the Functional Test, the device shall be configured as follows:

z Recording mode: “Overwrite” (“Recycle” in AX8/AX16 500/200))

z Recording rate: “25 ips”

z Image quality: “Very high”

z Panic recording: “On”

7.2 Test procedures

Perform the following tests in the normal operating mode.

Test# Action Test

1 Power on the device.

Verify booting of the device. LEDs

illuminated?

Connect all video input channels to video

signals.

Connect a monitor to the video outputs

(BNC and VGA).

Switch monitor to display the live image

of all cameras.

Verify video input and video output signals.

Switch on the Panic recording mode for

at least 2 hours.

Start recording.

Stop Panic recording mode and search

for recorded images in the Search menu.

Verify recorded video.

5 Access the “Storage” menu in the OSD. Verify HDD parameters.

6 Access System Log.

Verify system log in regards to errors or

reboots of the system.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Brak uwag

Siemens SISTORE AX9 Przewodnik Instalacji Strona 34