Siemens SISTORE AX9 Przewodnik Instalacji Pobierz pdf (Strona 7)

Safety

Siemens Building Technologies

Fire Safety & Security Products 03.2009

2.2.3 Setup

Damage due to unsuitable mounting location

z Observe the environmental requirements recommended by the manufacturer.

z Do not operate the device close to sources of powerful electromagnetic

radiation.

z Protect the device against moisture.

z Do not operate the device in excessively dusty places.

z Do not expose the device to mechanical vibrations or shocks.

z Put a shock-absorbing and antistatic material on the desk where the HDD is to

be handled (the antistatic material should be put on top of the shock-absorbing

material).

z Do not press on the top of the button of the drive.

Damage to the device due to lack of ventilation

z Do not block or cover the ventilation openings of the device.

Damage to the device due to overload

z Use only the shielded video interface cable recommended in this document to

ensure compliance with the limits for digital output devices.

Risk of failure of the main device

z Power cables to the main device are to be run separately and have a dedicated,

clearly labelled fuse.

Danger of electrical shock due to insufficient labelling

z Terminals carrying an external voltage supply must be labelled "DANGER –

external voltage".

Danger of electrical shock and damage to the device

z Electrical grounding must meet the customary local safety standards and

regulations.

z Handle the drive care fully by the edges. Do not touch the exposed printer circuit

board or any electronic components.

z Wear a wrist strap when handling HDD.

z Before handling the drive, discharge any static electricity from yourself and your

clothing.

z With one hand touch an unpainted metal surface, then touch the ESD bag with

the other hand. Remain in contact with the metal surface and the bag for a

minimum of 2 seconds.

Danger of electrical shock due to incorrect connection

z Make sure the device is permanently connected to the electricity supply; a

readily accessible disconnect device must be provided.

Liability claim

z For reasons of electromagnetic compatibility RS232, USB, audio in/out and

power supply cables must not exceed 3 meters length.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SISTORE AX9 Przewodnik Instalacji Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kamery ochrony Siemens SISTORE AX9