Siemens Advance Network Gateway Instrukcja Użytkownika Pobierz pdf (Strona 35)

Data Hiway Connections, Continued

More Information

For technical information on the Data Hiway refer to Appendix A in the

Optichrom Advance Library Set, Volume 2, Board Installation and

Strapping Manual.

Instructions

Step Action

1. Place the ANG_EN AC Power Supply (Mains) circuit

breaker to OFF. On the ANG_EN Power Supply Assembly

place toggle ON/OFF switch to OFF.

WARNING

Placing the Power Supply Assembly toggle ON/OFF switch

to OFF does not remove the main voltage to the J1

terminals. To remove all input power to the ANG_EN, the

AC Power (Mains) to the ANG_EN needs to be shut off.

2. Route the Data Hiway cable to the ANG_EN in accordance

with national or local electrical codes and regulations; see

Figure 2-1.

To make the Data Hiway connections easier we have made it a

removable connector. Simply grasp the top portion of the connector and

pull it straight out from the base connector; see Figure 2-6.

Installation Note

Do not plug the Data Hiway connector in until you have set the loop and

unit number; see Chapter 3, Data Communications Setup.

CAUTION

2000590-001 Installation • 21

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 87 88

Brak uwag

Siemens Advance Network Gateway Instrukcja Użytkownika Strona 35