Siemens E12 Instrukcja Użytkownika Pobierz pdf (Strona 23)

Industry Automation and Drive Technologies - SCE

TIA Training Document

Page 23 of 47 Module

E12

Status: 01/2010 Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120

4.3 Assigning the Device Name

18. Highlight module VS120 and then select, via the menu “Destination system“, at Ethernet ’Assign

device name’.

Note:

A precondition for this is that the PG/PC interface is set to TCP/IP and the network card for the PC is

configured correctly. For example, IP address 192.168.0.99, subnet 255.255.255.0 and router

address -.-.-.- (refer to Module E02).

19. Highlight the VS100 module and then click on the button “Assign name“. Close the window.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Brak uwag

Siemens E12 Instrukcja Użytkownika Strona 23