Siemens SPCK421 Dokumentacja Pobierz pdf (Strona 233)

Engineer programming via the browser

Configuring communications

233

Siemens AB

A6V10276959

Security Products

18.11.2011

GPRS Hangup

Timeout

Enter the time in seconds after which the GPRS call will hang up. (0

= stay connected until IP connection is up)

GPRS Autoconnect

Check this box to automatically trigger a GPRS call to the server if

an IP network fault occurs.

Dial-up on Net Fault

Check this box to report network faults on a dial-up test call.

Dial-up Interval 1*

Enter the number of minutes between dial-up test calls when

network link is up.

Dial-up Interval 2*

Enter number of minutes between dial-up test calls when network

link is down.

Network Address*

Enter the IP address of the receiver. This is only required if the

connection to the EDP receiver is being made over the Ethernet

interface. If using one of the on-board modems then leave this field

blank.

Phone Number*

Enter the first phone number that the modem(s) will dial to contact

the receiver.

Phone Number 2*

Enter a second phone number that the modem(s) will dial in the

event that the first number dialled did not result in a call being

successfully established.

Events

Primary Receiver

Check this box to indicate that this is the primary receiver. If

unchecked, this is a backup receiver.

Re-queue Events

Check this box if events that failed to report are to be re-queued for

transmission

Verification

Check this box if Audio/Video verification is to be sent to this

receiver.

Event Filter

Click this button to edit the filter events that will trigger an EDP call.

Refer to Editing Events Filter Settings [➙ 233].

* EDP dial-up over PSTN is not supported in this release.

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SPCK421 Dokumentacja Strona 233

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Klawiatury numeryczne Siemens SPCK421