Siemens E12 Instrukcja Użytkownika Strona 24

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 47
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 23
Industry Automation and Drive Technologies - SCE
TIA Training Document
Page 24 of 47 Module
E12
Status: 01/2010 Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120
20. By clicking on ' ’, we can now load the hardware configuration into the PLC. The operating
mode switch should be on Stop! ( ).
(After the hardware is loaded into the CPU, the red BF LED on the VS120 goes out)
21. Close the hardware configuration.
Przeglądanie stron 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

Komentarze do niniejszej Instrukcji

Brak uwag