Siemens SINUMERIK 802D sl Instrukcja Operatora Pobierz pdf (Strona 22)

Overview of alarms 06/2009

NCK alarms

2-22

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

4112 Servo cycle changed to %1 ms

Parameters: %1 = String (new servo cycle time)

Definitions: For PROFIBUS/PROFINET only:

MD10060 $POSCTRL_SYSCLOCK_TIME_RATIO has been modified because of the modified DP

cycle in the SDB (MD10050 $SYSCLOCK_CYCLE_TIME).

Reaction: Alarm display.

Remedy: MD10060 $MN_POSCTRL_SYSCLOCK_TIME_RATIO RATIO has been modified.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

4113 Sysclock cycle changed to %1 ms

Parameters: %1 = String (new PLC cycle time)

Definitions: For PROFIBUS/PROFINET only:

MD10050 $SYSCLOCK_CYCLE_TIME has been modified because of the modified DP cycle in the

SDB.

Reaction: Alarm display.

Remedy: MD10050 $MN_SYSCLOCK_CYCLE_TIME has been modified.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

4114 Error in DP cycle of the SDB

Parameters: %1 = String (new PLC cycle time)

Definitions: For PROFIBUS/PROFINET only:

The DP cycle in the SDB contains an error and cannot be set. The default value of

MD10050$MN_SYSCLOCK_CYCLE_TIME is set.

Reaction: Alarm display.

Remedy: Correct the SDB

Program Con-

tinuation:

Switch control OFF - ON.

4150 [Channel %1: ] Invalid M function subprogram call configured

Parameters: %1 = Channel number

Definitions: MD10715 $MN_M_NO_FCT_CYCLE[n] or MD10718 $MN_M_NO_FCT_CYCLE_PAR contains

invalid configuration data: An M function, which is occupied by the system and cannot be replaced by

a subprogram call has been specified in MD10715 $MN_M_NO_FCT_CYCLE[n] for the configuration

of the subprogram call via M function:

- M0 to M5,

- M17, M30,

- M19, M40 to M45,

- M function for selecting spindle/axis mode according to MD20094

$MC_SPIND_RIGID_TAPPING_M_NR (default: M70),

- M functions for nibbling/punching as configured in MD26008 $MC_NIBBLE_PUNCH_CODE if acti-

vated by MD26012 $MC_PUNCHNIB_ACTIVATION.

- Also M96 to M99 for applied external language (MD18800 $MN_MM_EXTERN_LANGUAGE).

MD10718 $MN_M_NO_FCT_CYCLE_PAR contains an invalid array index of MD10715

$MN_M_NO_FCT_CYCLE[n]. Currently, the values 0 to 9 are permissible. The affected machine data

is reset to the default value -1. This deactivates the function.

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Configure an M function in MD10715 $MN_M_NO_FCT_CYCLE[n] that is not occupied by the sys-

tem, or configure a permissible array index in MD10718 $MN_M_NO_FCT_CYCLE_PAR.

Program Con-

tinuation:

Switch control OFF - ON.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 339 340

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SINUMERIK 802D sl Instrukcja Operatora Strona 22

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl