Siemens SINUMERIK 802D sl Instrukcja Operatora Pobierz pdf (Strona 25)

NCK alarms

06/2009 Overview of alarms

2-25

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

MD22035 $MC_AUXFU_ASSIGN_SPEC[n]

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Reconfigure the auxiliary function.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

4200 [Channel %1: ] Geometry axis %2 must not be declared a rotary axis

Parameters: %1 = Channel number

%2 = Axis name

Definitions: The geometry axes represent a Cartesian coordinate system and therefore the declaration of a geom-

etry axis as rotary axis leads to a definition conflict.

Reaction: NC not ready.

Mode group not ready, also effective for single axes

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Please inform the authorized personnel/service department.

Remove rotary axis declaration for this machine axis.

For this purpose, the geometry axis index for the displayed geometry axis must be determined by

means of MD20060 $MC_AXCONF_GEOAX_NAME_TAB. The channel axis number is stored with

the same index in MD20050 $MC_AXCONF_GEOAX_ASSIGN_TAB. The channel axis number

minus 1 provides the channel axis index under which the machine axis number is found in MD20070

$MC_AXCONF_MACHAX_USED.

Program Con-

tinuation:

Switch control OFF - ON.

4210 [Channel %1: ] Spindle %2 declaration as rotary axis missing

Parameters: %1 = Channel number

%2 = Axis name, spindle number

Definitions: If a machine axis is to be operated as a spindle, this machine axis must be declared as a rotary axis.

Reaction: NC not ready.

Mode group not ready, also effective for single axes

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Please inform the authorized personnel/service department. Set rotary axis declaration for this

machine axis in the axis-specific MD30300 $MA_IS_ROT_AX.

Program Con-

tinuation:

Switch control OFF - ON.

4215 [Channel %1: ] Spindle %2 declaration as modulo axis missing

Parameters: %1 = Channel number

%2 = Axis name, spindle number

Definitions: The spindle functionality requires a modulo axis (positions in [deg]).

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Please inform the authorized personnel/service department.

Set MD30310 $MA_ROT_IS_MODULO.

Program Con-

tinuation:

Switch control OFF - ON.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 339 340

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SINUMERIK 802D sl Instrukcja Operatora Strona 25

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl