Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 136)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-136

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

14411 Channel %1 block %2 tool radius compensation active at geometry axis

changeover

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: It is not permissible to change the assignment of geometry axes to channel axes when tool radius

compensation is active.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Change part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14412 Channel %1 block %2 transformation active at geometry axis changeover

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: It is not permissible to change the assignment of geometry axes to channel axes when transformation

is active.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Change part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14414 Channel %1 block %2 GEOAX function: incorrect call

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The parameters for the GEOAX(...) call are incorrect. Possible causes:

- Uneven number of parameters.

- More than 6 parameters were specified.

- A geometry axis number was programmed which was smaller than 0 or greater than 3.

- A geometry number was programmed more than once.

- An axis identifier was programmed more than once.

- An attempt was made to assign a channel axis to a geometry axis which has the same name as one

of the channel axes.

- An attempt was made to remove a geometry axis from the geometry axis grouping and the geometry

axis has the same name as one of the channel axes.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program or correction block.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14415 Channel %1 block %2 tangent control: changeover geometry/channel

axis not allowed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: An assignment change of the geometry axes to channel axes is not permitted with active tangential

control.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Change the part program, use TANGDEL to delete the active tangential control.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 391 392

Siemens SINUMERIK 802D sl Dokumentacja Strona 136

Komentarze do niniejszej Instrukcji

Siemens SINUMERIK 802D sl Dokumentacja Strona 136

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl