Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 307)

Cycle alarms

06/2007 Overview of alarms

2-307

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61357 Channel %1 Block %2: No resources free

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE106.

Not enough NC memory space available.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Delete the files.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61369 Channel %1 block %2: Position of corner not clearly definable, check

parameter (_SETV[0...7])

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE961.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Define P1 and P2 or P3 and P4 in a way that the intersection of the straights determined by these

points is outside the sections formed by P1 and P2 or P3 and P4.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61501 Channel %1 block %2: Simulation is active

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: all grinding cycles

Remedy: Reset simulation

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61502 Channel %1 block %2: No tool offset active

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: all grinding cycles

Remedy: A tool number must be programmed

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61503 Channel %1 block %2: tool nose radius compensation left or right

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: CYCLE410, CYCLE411, CYCLE412,

CYCLE413, CYCLE414, CYCLE415, CYCLE416, CYCLE420

Remedy: A tool offset value has to be programmed

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61504 Channel %1 block %2: _KNG incorrect for setup

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 302 303 304 305 306 307 308 309 310 311 312 ... 391 392

Siemens SINUMERIK 802D sl Dokumentacja Strona 307

Komentarze do niniejszej Instrukcji

Siemens SINUMERIK 802D sl Dokumentacja Strona 307

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl