Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 287)

Cycle alarms

06/2007 Overview of alarms

2-287

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61201 Channel %1 block %2: Wrong sequence in machining block

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The sequence of elements in the machining block is invalid.

Alarm triggered by following cycles: E_CP_CE, E_CP_DR, E_MANAGE, F_CP_CE, F_CP_DR,

F_MANAGE.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Sort the sequence in the machining block.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61202 Channel %1 block %2: No technology cycle

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: No technology cycle was programmed in the machining block.

Alarm triggered by following cycles: E_MANAGE, F_MANAGE.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Program a technology block.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61203 Channel %1 block %2: No position cycle

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: No positioning cycle was programmed in the machining block.

Alarm triggered by following cycles: E_MANAGE, F_MANAGE.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Program positioning block.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61204 Channel %1 block %2: Technology cycle unknown

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The specified technology cycle in the machining block is unknown.

Alarm triggered by following cycles: E_MANAGE, F_MANAGE.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Delete and reprogram the technology block.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 391 392

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SINUMERIK 802D sl Dokumentacja Strona 287

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl