Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 281)

Cycle alarms

06/2007 Overview of alarms

2-281

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61128 Channel %1 block %2: Insertion angle = 0 for insertion with oscillation or

helix

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: SLOT1.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check parameter _STA2.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61129 Channel %1 block %2: perpendic. approach and retraction during

contour milling only allowed with G40

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE72.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61130 Channel %1 block %2: positions of parallel axes cannot be compensated.

No workpiece reference agreed.

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE69.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61131 Channel %1 block %2: parameter _GEO incorrect, _GEO=%4

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE69.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 391 392

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SINUMERIK 802D sl Dokumentacja Strona 281

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl