Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 275)

Cycle alarms

06/2007 Overview of alarms

2-275

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61101 Channel %1 block %2: Reference plane incorrectly defined

Parameters:

Definitions: Source (cycle):

CYCLE71

CYCLE22

CYCLE81 to CYCLE88

CYCLE840

CYCLE375T

SLOT1, SLOT2

POCKET3, POCKET4

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Either different values must be entered for the reference plane and the retraction plane if they are rel-

ative values or an absolute value must be entered for the depth.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61102 Channel %1 block %2: No spindle direction programmed

Parameters:

Definitions: Source (cycle):

CYCLE86

CYCLE88

CYCLE840

CYCLE370T to CYCLE374T, CYCLE376T

CYCLE383T to CYCLE385T

CYCLE381M, CYCLE383M, CYCLE384M, CYCLE387M

POCKET3, POCKET4

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Parameter SDIR (or SDR in CYCLE840) must be programmed.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61103 Channel %1 block %2: Number of holes is zero

Parameters:

Definitions: Source (cycle):

HOLES1

HOLES2

Remedy: No value has been programmed for the number of holes.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61104 Channel %1 block %2: Contour violation of grooves

Parameters:

Definitions: Source (cycle):

SLOT1

SLOT2

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Errors in parameterization of milling pattern in those parameters which define the position and shape

of slots/longitudinal holes on a circle

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 391 392

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SINUMERIK 802D sl Dokumentacja Strona 275

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl