Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 203)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-203

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

17181 Channel %1 block %2 T no.= %3, D no.= %4 not existing

Parameters: %1 = channel number

%2 = block number, label

Definitions: A programmed D number was not recognized by the NC. By default, the D number refers to the spec-

ified T number. If the flat D number function is active, T= 1 is output.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: If the program is incorrect, remedy the error with a correction block and continue the program.

If the data block is missing, download a data block for the specified T/D values onto the NCK (via HMI

with overstore) and continue the program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17182 Channel %1 block %2 illegal sum correction number

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: An attempt was made to access a non-defined total offset of the current tool edge.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Access the total offset memory with $TC_SCP*, $TC_ECP*, check the total offset selection DLx or

tool selection Ty or offset selection Dz.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17183 Channel %1 block %2 H number already available in T no.= %3, D no.=

Parameters: %1 = channel number

%2 = block number, label

%3 = T number

%4 = D number

Definitions: Each H number (apart from H=0) may only be issued once in a TO unit. The cutting edge specified

already has the H number. If the H number is to be issued several times, machine data 10890 must

be set as bit 3 = 1.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify programs:

Select another H number

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17188 Channel %1 D number %2 defined in tool T no. %3 and %4

Parameters: %1 = channel number

%2 = offset number D

%3 = T number of first tool

%4 = T number of second tool

Definitions: The specified D number %2 in the tool list of channel %1 is not unique.

The specified T numbers %3 and %4 each have an offset with number %2.

Reaction: Interface signals are set.

Alarm display.

Remedy: Ensure that the D numbers within the TO unit are unique.

If unique numbering is not necessary for subsequent operations, do not use the command.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 391 392

Siemens SINUMERIK 802D sl Dokumentacja Strona 203

Komentarze do niniejszej Instrukcji

Siemens SINUMERIK 802D sl Dokumentacja Strona 203

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl