Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 200)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-200

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Remedy: Remove write access operations to protected variable from the NC program or machine data file.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17080 Channel %1 block %2 %3 value below lower limit

Parameters: %1 = channel number

%2 = block number, label

Definitions: An attempt was made to write an MD with a value that is smaller than the defined lower limit.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department.

Determine the input limits of the MD and assign a value within these limits.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17090 Channel %1 block %2 %3 value exceeds upper limit

Parameters: %1 = channel number

%2 = block number, label

Definitions: An attempt was made to write an MD with a value that is higher than the defined upper limit.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department.

Determine the input limits of the MD and assign a value within these limits.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17095 Channel %1 block %2 invalid value

Parameters: %1 = channel number

%2 = block number, label

Definitions: An attempt was made to write an invalid value, e.g. zero, into a machine data.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Correct the value assignment, e.g. a value within the value range not equal to zero.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17100 Channel %1 block %2 digital input/comparator no. %3 not activated

Parameters: %1 = channel number

%2 = block number, label

%3 = no. of input

Definitions: Either an attempt was made to read a digital input n via the system variable $A_IN[n] and this input

has not been activated via NCK machine data 10350 FASTIO_DIG_NUM_INPUTS; or to read a com-

parator input via system variable $A_INCO[n] and this input belongs to a comparator which has not

been activated.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department. Modify part program or machine data

accordingly.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17110 Channel %1 block %2 digital output no. %3 not activated

Parameters: %1 = channel number

%2 = block number, label

%3 = no. of output

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 391 392

Siemens SINUMERIK 802D sl Dokumentacja Strona 200

Komentarze do niniejszej Instrukcji

Siemens SINUMERIK 802D sl Dokumentacja Strona 200

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl