Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 87)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-87

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

12050 Channel %1 block %2 DIN address %3 not configured

Parameters: %1 = Channel number

%2 = Block number, label

%3 = NC address in the source text block

Definitions: The name of the NC address (e.g. X, U, X1) is not defined in the control.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Study the Programming Guide and the machine data with respect to the addresses actually configured

and their significance and correct the NC block accordingly.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12060 Channel %1 block %2 same G group programmed repeatedly

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The G functions that can be used in the part program are divided into groups that are syntax defining

or non-syntax defining. Only one G function may be programmed from each G group. The functions

within a group are mutually preclusive.

The alarm refers only to the non-syntax defining G functions. If several G functions from these groups

are called in one NC block, the last of these in a group is active in each case (the previous ones are

ignored).

G FUNCTIONS:

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-

RECT. The correction pointer positions on the incorrect block.

No remedy is required: You should, however, check whether the G function last programmed really is

the one required.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12070 Channel %1 block %2 too many syntax-defining G functions

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Syntax defining G functions determine the structure of the part program block and the addresses con-

tained in it. Only one syntax defining G function may be programmed in each NC block. The G func-

tions in the 1st to 4th G group are syntax defining.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PROGRAM COR-

RECT. The correction pointer positions on the incorrect block.

Analyze NC block and distribute the G functions over several NC blocks.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12080 Channel %1 block %2 syntax error in text %3

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Source text area

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 391 392

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SINUMERIK 802D sl Dokumentacja Strona 87

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl