Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 285)

Cycle alarms

06/2007 Overview of alarms

2-285

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

Remedy: Enter another character.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61185 Channel %1 block %2: no or wrong (min > max) angle areas of rotary

axes agreed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The rotary axis angle range is invalild. Alarm triggered by following cycles: CYCLE800.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check installation and start-up of the swivel cycle CYCLE800.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61187 Channel %1 block %2: block search mode not allowed -> select block

search with contour calculation

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The alarm is triggerd by the following cycles: CYCLE800.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Select block search with contour calculation.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61191 Channel %1 block %2: 5 axis transformation not set up

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The alarm is triggerd by the following cycles: CYCLE832.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61192 Channel %1 block %2: second 5 axis transformation not set up

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The alarm is triggerd by the following cycles: CYCLE832.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 391 392

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SINUMERIK 802D sl Dokumentacja Strona 285

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl