Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 272)

Overview of alarms 06/2007

Cycle alarms

2-272

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61013 Channel %1 Block %2: Basic settings were changed, program cannot be

executed

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The basic settings are not compatible with the generated program. Alarm triggered by following

cycles: E_CP_CE, E_CP_CO, E_CP_DR, F_CP_CE, F_CP_CO, F_CP_DR.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check and, if necessary, change the basic settings.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61015 Channel %1 Block %2: Contour is not defined

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: Alarm triggered by following cycles: .

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61017 Channel %1 block %2: function %4 not present in NCK

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: Alarm triggered by following cycles: .

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61018 Channel %1 block %2: function %4 not executable with NCK

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: Alarm triggered by following cycles: .

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61019 Channel %1 Block %2: Parameter %4 incorrectly defined

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: Alarm triggered by following cycles: CYCLE60, CYCLE83.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check the value of the parameter.

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 391 392

Komentarze do niniejszej Instrukcji

Brak uwag

Siemens SINUMERIK 802D sl Dokumentacja Strona 272

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl