Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 193)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-193

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

16946 Channel %1 start via START is not allowed

Parameters: %1 = Channel ID

Definitions: This alarm is active with "Group Serupro" only. _Group Serupro" is activated by means of

"$MC_SERUPRO_MODE BIT2" and enables the retrace support of entire channel groups during

block search.

The machine data $MC_DISABLE_PLC_START specifies which channel is generally started from the

PLC and which channel is only allowed to be started from another channel via the START part pro-

gram command.

This alarm occurs if the channel was started via the START part programm command and

$MC_DISABLE_PLC_START==FALSE was set.

Reaction: Alarm display.

Remedy: Modify $MC_DISABLE_PLC_START of switch off "Group Serupro" (see $MC_SERUPRO_MODE).

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16947 Channel %1 start via PLC is not allowed

Parameters: %1 = Channel ID

Definitions: This alarm is active with "Group Serupro" only. _Group Serupro" is activated by means of

"$MC_SERUPRO_MODE BIT2" and enables the retrace support of entire channel groups during

block search.

The machine data $MC_DISABLE_PLC_START specifies which channel is generally started from the

PLC and which channel is only allowed to be started from another channel via the START part pro-

gram command.

This alarm occurs if the channel was started via the PLC and $MC_DISABLE_PLC_START==TRUE

was set.

Reaction: Alarm display.

Remedy: Modify $MC_DISABLE_PLC_START of switch off "Group Serupro" (see $MC_SERUPRO_MODE).

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16948 Channel %1 dependent channel %2 still active

Parameters: %1 = Channel ID

%2 = Channel ID

Definitions: This alarm is active with "Group Serupro" only. _Group Serupro" is activated by means of

"$MC_SERUPRO_MODE BIT2" and enables the retrace support of entire channel groups during

block search.

A _dependent channel_ is a channel that had indirectly been started by the currently active channel.

The currently active channel was started via PLC.

This channel m_u_s_t be terminated (i.e. reached M30) before the current channel is terminated.

This alarm occurs if the currently active channel is terminated before the dependent channel.

Reaction: Alarm display.

Remedy: Switch off "Group Serupro" (see $MC_SERUPRO_MODE) or install WAITE.

Program Con-

tinuation:

Clear alarm with the Delete key or NC START.

16949 Correspondence between marker of channel %1 and channel %2 is

invalid.

Parameters: %1 = Channel ID

%2 = Channel ID

Definitions: This channel defines a WAIT marker with other channels, which on their part have no correspondence

with this wait marker.

This channel's WAIT marker has no explicit counterpart in the other channel; i.e. the channels do not

mutually wait.

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 391 392

Siemens SINUMERIK 802D sl Dokumentacja Strona 193

Komentarze do niniejszej Instrukcji

Siemens SINUMERIK 802D sl Dokumentacja Strona 193

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl