Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 146)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-146

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Remedy: Please inform the authorized personnel/service department.

Only program one help function per help function group. (For the group division, see the machine man-

ufacturer's programming guide).

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14761 Channel %1 block %2 motion synchronous action: DELDTG function not

allowed with active tool radius compensation

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Rapid delete distance-to-go for synchronous actions is not allowed with DELDTG when tool radius

compensation is active.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Deactivate tool radius compensation before performing rapid delete distance-to-go and then reselect

as of SW 4.3: "Delete distance-to-go without preparation".

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

14762 Channel %1 block %2 too many PLC variables programmed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The number of programmed PLC-variable auxiliary functions has exceeded the maximum permitted

number. The number is set in MD 28150 MM_NUM_VDIVAR_ELEMENTS.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Modify part program or machine data.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

14770 Channel %1 block %2 auxiliary function programmed incorrectly

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The permissible number of programmed auxiliary functions per NC block has been exceeded or more

than one auxiliary function of the same auxiliary function group has been programmed (M and S func-

tion).

In the user-defined auxiliary functions, the maximum number of auxiliary functions per group in the NC

system settings has been defined for all auxiliary functions by means of the MD 11100

AUXFU_MAXNUM_GROUP_ASSIGN (default: 1).

For each user-defined auxiliary function to be assigned to a group, the assignment is made using 4

machine data items.

MD 22010 AUXFU_ASSIGN_TYPE: Auxiliary function type, e.g. M

MD 22000 AUXFU_ASSIGN_GROUP: Required group

MD 22020 AUXFU_ASSIGN_EXTENSION:Possibly required extension

MD 22030 AUXFU_ASSIGN_VALUE: Function value

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Correct the part program - max. 16 auxiliary functions, max. 5 M functions per NC block, max. 1 aux-

iliary function per group.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 391 392

Siemens SINUMERIK 802D sl Dokumentacja Strona 146

Komentarze do niniejszej Instrukcji

Siemens SINUMERIK 802D sl Dokumentacja Strona 146

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl