Siemens SINUMERIK 802D sl Dokumentacja Pobierz pdf (Strona 159)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-159

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

15410 Channel %1 block %2 initialization file contains invalid M function

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The only M function allowed in an Init block is the M02, M17 or M30 end-of-program function.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Remove all M functions from the Init block except for the end identifier.

An Init block may contain value assignments only (and global data definitions if they are not defined

again in a program that can be executed later).

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

15420 Channel %1 block %2 instruction in current mode not allowed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The interpreter has detected an invalid instruction (e.g. a traverse instruction) while processing of an

Init module.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Remove all motion actions and auxiliary functions from the Init block except for the end identifier.

An Init block may contain value assignments only (and global data definitions if they are not defined

again in a program that can be executed later).

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

15460 Channel %1 block %2 syntax error with modal function

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The addresses programmed in the block are not compatible with the modal syntax-determining G

function.

Example:

N100 G01 ... I .. J.. K.. LF

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Correct the displayed block and ensure that the G functions and addresses in the block are in agree-

ment.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

15500 Channel %1 block %2 illegal angle of shear

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The function CSHEAR has been called with an illegal (impossible) angle of shear, e.g. when the sum

of angles between the axis vectors is greater than 360 degrees.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Program the angle of shear in accordance with the geometrical conditions of the machine and work-

piece system.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 391 392

Siemens SINUMERIK 802D sl Dokumentacja Strona 159

Komentarze do niniejszej Instrukcji

Siemens SINUMERIK 802D sl Dokumentacja Strona 159

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Siemens SINUMERIK 802D sl